Brand, Digitech. Height, 125mm. Length/Breadth/Depth, 23mm. Weight, 180g. Low Cost Digital Multimeter (DMM). Nalogovaya sistema rk prezentaciya. This is a full feature.

Low Cost Digital Multimeter (DMM). Low Cost Digital Multimeter (DMM). A perfect first meter for the hobbiest! • Compact Size • 19 Range • 3.5 Digit • Transistor Test • Diode Test. Login for pricing. Insulation test voltages: 500V, 1000V, 1500V, and 5000V. • AC/DC voltage: 0.5 V.

Read and understand this user manual before operating the meter. Connect the Black Earth test lead to the Earth connector and the Red test lead to the LINE and COM connectors. Set the Function Selector switch to the. It all came about, frankly, when we started giving away free multimeters to our design clients - and we realised there was no easy instruction manual for a meter.

Resistance/continuity range protection: PTC resistor; Continuity: Standard - buzzer sounds for less than 1500ohm or diode:-( Continuity if R29=22k - sounds for. Operating manual for a digitech qm 1520 multimeter. Operating manual for a digitech qm 1520 multimeter. 2244 Sites Listed 50 Tagged Resources. G'day Mark and prd, Well, you could be right, that solenoid on the Honda mower is bit loose and does move slightly, I had to hold onto the top of the solenoid to stop it from spinning when I undone the nut holding the battery cable.

Anyway, I've placed the red battery cable back on the Honda solenoid. Those letters on the Ignition switch was hard to find, the buggers were stamped on the other side of the spade terminals. I had to use good light and angle reflection to see them. I've marked the letters on the spade terminals facing outwards for easier identification. I'm not keen in buying a Honda Solenoid to replace the other as it looks like a pain to remove it from the motor.

I noticed a black wire from the Honda Solenoid, could be attached to a white coloured wire going to the ignition switch harness. The Black wire with white stripe coming from the Honda solenoid is earthed near the solenoid. I have tested the ignition switch without wires, it's good to use.

I've attached additional pics. - 04/12/15 06:23 AM Re: Greenfield MkII Evolution Ride-on - Wiring [] Novice Joined: Nov 2015 Posts: 39. I have no idea about those other wires that are located near the oil filler pipe. There are some wires going to what looks like to be the solenoid and the rest was just zipped tied. There is a red wire with what looks like a fuse holder (no fuse), other wire that would connect with that one has either disappeared or been canabalised for something else. There is another black or brown wire with a female bullet terminal covered with dust. Cheers, Bondy - 04/12/15 03:46 PM Re: Greenfield MkII Evolution Ride-on - Wiring [] GREENFIELD TECHNICIAN Joined: Mar 2015 Posts: 367.